Polymkaer

Polymaker PolyLite ABS 1.75mm 1KG roll Grey

$21.99

Only 9 pieces in stock!

  • PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.

    Depending on the size of the models you are trying to print, PolyLite™ ABS can required enclosed 3D printer, or even actively heated chamber.

    In general, a non-enclosed 3D printer with 90˚C bed temperature and 260˚C printing temperature can handle models smaller than fist size. For bigger prints you will require an enclosed 3D printer (~40-50˚C), for models bigger than ~15-20cm in any direction, it will require an actively heated chamber (~70˚C+).

    Using proper bed adhesion can also help printing larger parts without deformation/warping issue.
    We can recommend Magigoo or Honeybadger PEI as adhesive and bed surface options.

    Printing Temperature: 245˚C - 265˚C
    Bed Temperature: 90˚C - 100˚C
    Printing Speed: 30mm/s - 50mm/s
    Fan: OFF

    Direct Drive:
    Retraction Distance: 1mm
    Retraction Speed: 20mm/s
    Indirect Drive:
    Retraction Distance: 3mm
    Retraction Speed: 40mm/s

    Drying Settings: 70˚C for 6h
    (Only if the material has absorbed moisture)