Bambu PETG Matte
Bambu PETG Matte
Bambu PETG Matte
Matte. Vibrant. Elegant.
Say goodbye to that "plastic shine." Bambu Lab PETG Matte delivers a soft, low-gloss finish that helps hide layer lines and gives every print a refined, premium feel. With 8 vibrant colors to choose from, including baby blue, avocado green, pink, and more, there's a shade for every room and every mood. Print a charming seasonal bunny, a lifelike orchid in bloom, or a soft-glow bedside lamp, the perfect choice for decor that truly belongs in your space.
PETG that prints like PLA
A reworked formula helps reduce the stringing, blobs, and clogs often associated with traditional PETG. Crisp details, clean bridges, and smooth overhangs come standard. Even on long prints with hours of travel between features, the results stay reliable and consistent, with a printing experience that feels as smooth as PLA.
Bambu PETG Matte handles moisture better than most PETG filaments. Its reformulated base offers improved resistance to ambient humidity, so a spool taken straight off the shelf still prints the way it should*. *Extended exposure above 72 hours at 50% humidity still calls for drying. See Printing Tips for guidelines.
PETG is notorious for supports that fuse to the model, the kind you have to wrestle off with pliers. Bambu PETG Matte makes removal easier. Even on steep overhangs and deep holes, supports peel away by hand, leaving the surface underneath smooth and clean. No extra support material needed.
Tough enough to earn the name
A softer look and easier printing haven’t come at the cost of strength with Bambu PETG Matte. Behind the refined finish is the durability PETG is known for, tough enough for load-bearing hooks and speaker shelves, moisture-resistant enough for soap dishes and bathroom organizers, and weather-resistant enough for planters that live on a sun-beaten balcony. Heat. Humidity. Weight. Weather. Bambu PETG Matte takes it all.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Download
Printing Tips
1. Accessory Compatibility
Compatible with all printers, AMS, build plate, and nozzles.
2. Drying Recommendations
Dry the filament before printing if it has been exposed to humidity above 50% RH for more than 72 hours. For more details, please refer to: Filament drying instructions on WIKI.
3. Refill Guidelines
The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.
4. Important Notice
- Bambu PETG Matte adheres strongly to PEI build plates. Let the build plate cool fully before removing the print to help avoid damage to both the plate and the bottom surface of the printed object. For more guidance, search "PETG Usage Guide" on the Bambu Lab Wiki.
- Bambu PETG Matte uses a specially modified formula to enable easy support removal, the matte finish, and strong layer adhesion. This greatly improves same-material support peel performance, but PETG Matte is not recommended as a support for PLA. For multi-material support, use Bambu PETG Basic
5.Safety Tips
- Please store the filament in a cool, dark, and dry environment away from direct sunlight and high temperatures.
- Please keep filament and any broken fragments out of reach of infants, children, and pets to prevent swallowing or choking.
- For opened filament, we recommend drying before use according to the wiki’s recommended temperature and time settings.
- Please print this filament in a well-ventilated area, or install an effective air filtration or exhaust system.
- As this filament is not food-grade, please avoid using finished prints for food storage or contact.
- As this filament is highly moisture-absorbent, please place any unused filament in a sealed container with desiccant immediately, and dry thoroughly before printing.
