Numakers PLA+
Order Code:
$15.99
Numakers PLA+
Order Code:
$15.99
Numakers PLA+
NuMakers PLA+ is their most popular filament line and top recommendation for beginners, thanks to its ease-of-use and trouble-free printing experience. Made using 100% virgin Natureworks 3D850 biopolymer resin with no fillers, it delivers excellent 3D printing characteristics including precise detail, good bed adhesion, minimal warping or curling, and low odor.
With its high printability, NuMakers PLA+ produces prints with sharp details, vibrant colors, and a glossy finish. If you're looking for a reliable, high-quality filament for everyday printing, this is the one.
For slicer settings and printing tips, check out our cheat sheets for Cura, PrusaSlicer, and Bambu Studio.
Pros
- Easy to print
- Biodegradable
- Good surface quality
- Low warping
- Works well at high print speeds
Cons
- 60 °C heat resistance
- Brittle
- Lower impact strength vs ABS & PETG
Details
| Printing difficulty | Easy |
| Temperature resistance | 60 °C |
| Toughness | Average |
| Susceptibility to warping | None |
| Odor | No odor |
| Post processing | Difficult |
| Solubility | Very difficult — in dangerous chemicals |
| Elasticity | None |
| Print speed | Up to 300 mm/s |
| Detail | Under 0.2 mm |
| Abrasivity | None |
| Hard to break | No |
Recommended printing settings
| Bed | 40–60 °C · Heated bed optional · Enclosure not required |
| Print surface | PEI · Glass plate · Painter's tape · Glue stick |
| Extruder | 200–230 °C · No special hot-end required |
| Cooling | Part cooling fan required · Fan speed: 100% |
Cheat sheets & guides
- Print guide — PLA Plus — General guide to get good results printing with PLA Plus
- PLA Plus — Cura — Cheat sheet with detailed settings for Cura
- PLA Plus — PrusaSlicer — Cheat sheet with detailed settings for PrusaSlicer
- PLA Plus — Bambu Studio — Cheat sheet with detailed settings for Bambu Studio
