{"title":"Voron Printers","description":"","products":[{"product_id":"ldo-voron-v2-4-kit","title":"Voron 2.4 R2 (Rev D+) 3D Printer Kit by LDO","description":"\u003ch1\u003eVoron 2.4 R2 (Rev D+) 3D Printer Kit\u003c\/h1\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eThe Voron 2.4 (also known as the v2.4) is the flagship 3D printer model by Voron Design, featuring a core XY motion system, quad-gantry leveling, and belted Z-axis for lightning-fast speeds and unparalleled quality.\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eLDO's latest \u003cstrong\u003eVoron 2.4 kit\u003c\/strong\u003e is now updated to \u003cstrong\u003eRev D+\u003c\/strong\u003e, including new exciting features and upgrades at a lower price. Building a v2.4 has never been easier!\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cem\u003e\u003cstrong\u003eNote: these kits are the US version 110V make sure your country supports this or that you can install a new bed heater for the appropriate voltage. \u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cem\u003ePreorder Info: Estimated arrival End of June- Early July\u003c\/em\u003e\u003cem\u003e\u003cbr\u003eRev D+ Changes for March 2026\u003c\/em\u003e\n\u003c\/h2\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eNitehawk SB update with USB passthrough for USB based eddy current probes\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cem\u003e\u003cbr\u003e Rev D includes\u003c\/em\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eOctopus board upgraded to \u003c\/strong\u003e\u003ca href=\"https:\/\/www.fabreeko.com\/products\/leviathan-v1-2-controller-board-by-ldo-voron?_pos=1\u0026amp;_psq=leviathan\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"leviathan LDO controller board for voron 2.4 and trident rev d\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eLDO Leviathan board\u003c\/strong\u003e\u003c\/a\u003e - In addition to 5x TMC2209 drivers, this new board features 2x TMC5160 HV compatible drivers for your A \u0026amp; B motors and is ready for 48V upgrades (sold separately) \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"nitehawk Sb toolhead board for voron 2.4 and trident rev d Ldo kit\" href=\"https:\/\/www.fabreeko.com\/products\/nitehawk-sb-toolhead-by-ldo?_pos=1\u0026amp;_psq=nite\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cstrong\u003eNitehawk SB Toolhead\u003c\/strong\u003e\u003c\/a\u003e - No more wire chains, LDO's latest kit includes the latest USB toolhead board for a cleaner and faster setup.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBondtech Integrated Drive Gear Assembly (IGDA) \u003c\/strong\u003e- One of the best extruder gears available in the market\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lighting\u003c\/strong\u003e - Upgraded to COB LED strip \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality of life upgrades\u003c\/strong\u003e - Pre-installed magnet sheet on the metal bed, printed parts (for LDO mods), and pre-terminated wiring all around.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eWhether you're a seasoned pro or just starting out, the latest \u003cstrong\u003eVoron 2.4 R2 (Rev D) 3D Printer Kit\u003c\/strong\u003e is the perfect machine for pushing the boundaries of what's possible in 3D printing. Get yours today and experience the future of making.\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\n\u003cstrong\u003e🔥\u003c\/strong\u003eSpecial Deals\u003cstrong\u003e🔥\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBundle the following items with your kit for a special discount. Just add them to your cart and the discount will be automatically applied.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25% off Extrusion Backers:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.fabreeko.com\/products\/v2-4-trident-titanium-extrusion-backers?variant=40722088001734\"\u003eTitanium\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrade the E3D Revo HF hotend\u003c\/strong\u003e to a \u003ca title=\"Rapido, phaetus\" href=\"https:\/\/www.fabreeko.com\/products\/phaetus-rapido-high-flow-hotend\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePhaetus Rapido HF\u003c\/a\u003e for just \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e$9.99\u003c\/strong\u003e just add it to cart\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: Rapido will require crimping of the hotend wires\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOur system will only let you add one special deal per kit, if you want to take advantage of both deals send us an email to Support@fabreeko.com or open a web chat and we will modify your order. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat you need to source\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003ca rel=\"noopener noreferrer\" title=\"Voron printed parts by PIF\" href=\"https:\/\/www.fabreeko.com\/collections\/printed-parts-by-pif\/products\/voron-v2-4-printed-parts-by-pif?variant=43645779443967\" target=\"_blank\"\u003ePrinted parts\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew for June 2024: (Rev D)\u003c\/strong\u003e now includes LDO Leviathan Board, LDO Nitehawk toolhead board, Bondtech IGDA, pre-installed bed magnet and included printed parts for LDO-specific mods (z endstop \u0026amp; other misc parts)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE3D Revo High-Flow Hotend\u003c\/strong\u003e with 60W heater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClockwork 2\u003cem\u003e \u003c\/em\u003emotor\u003cem\u003e \u003c\/em\u003e\u003c\/strong\u003eincluded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete panel set \u003c\/strong\u003efor enclosed printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLDO bed heater\u003c\/strong\u003e - Edge-to-edge heating pre-installed and wired ready to go!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Linear Rails\u003c\/strong\u003e- 12H size rails for X axis included. No more worrying about rusty rails. Remember to\u003ca href=\"https:\/\/docs.ldomotors.com\/guides\/rail_grease_guide\" class=\"is-internal-link is-valid-page\"\u003eproperly lubricate\u003c\/a\u003e your linear rails!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"ldo nitehawk usb toolhead board for rev d voron 2.4 and trident\" href=\"https:\/\/www.fabreeko.com\/products\/nitehawk-sb-toolhead-by-ldo?_pos=1\u0026amp;_psq=nite\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cb\u003eNiteHawk USB toolhead PCB\u003c\/b\u003e\u003c\/a\u003e - This toolhead board simplifies wiring by moving to 1 USB cable (included) from the toolhead to the MCU. it also adds many other upgrades like build-in accelerometer and multiple fan connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/docs.ldomotors.com\/guides\/heatset_insert_tool_guide\"\u003e\u003cstrong\u003eBrass Heatset Insert Tool\u003c\/strong\u003e\u003c\/a\u003e We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease! Check LDO's \u003ca href=\"http:\/\/docs.ldomotors.com\/guides\/heatset_insert_tool_guide\"\u003eHeatset Insert Tool Guide\u003c\/a\u003efor more information.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/docs.ldomotors.com\/adxl_tool\"\u003e\u003cstrong\u003eInput Shaper Tool\u003c\/strong\u003e\u003c\/a\u003e - We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-cut \u0026amp; Pre-wired\u003c\/strong\u003e- Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See instructions in LDO's \u003ca href=\"http:\/\/docs.ldomotors.com\/voron\/voron2\/wiring_guide_rev_a\"\u003edetailed wiring guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry PI 4B\u003c\/strong\u003e with included heatsink.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lighting\u003c\/strong\u003e - Bring lighting to your Voron with included LED strips and all necessary wiring!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNevermore Filter\u003c\/strong\u003e - We include parts for an optional internal circulation filter: the \u003ca href=\"https:\/\/github.com\/nevermore3d\/Nevermore_Micro\"\u003eNevermore Micro V5\u003c\/a\u003e by 0ndsk4 (carbon pellets not included due to shipping restrictions).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlicky Mod\u003c\/strong\u003e - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional \u003ca href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\"\u003eKlicky mod\u003c\/a\u003e by jlas1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Tools\u003c\/strong\u003e- We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2mm Drill Bit\u003c\/strong\u003e- Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 id=\"guides\" class=\"toc-header\"\u003eGuides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.ldomotors.com\/voron\/voron2\/printed_part_guide_rev_a\" title=\"Printed Parts Guide\"\u003e\u003cstrong\u003ePrinted Parts Guide\u003c\/strong\u003e\u003c\/a\u003e- Are you planning on printing parts before the kit arrives? Check this guide to see which parts to print\/replace\/omit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"Wiring Guide\" href=\"http:\/\/docs.ldomotors.com\/voron\/voron2\/wiring_guide_rev_a\" target=\"_blank\"\u003e\u003cstrong\u003eWiring Guide\u003c\/strong\u003e\u003c\/a\u003e- We created this supplementary guide to go along with the included cable kit. We recommend reading it ahead of time, as some cable routing is required while you assemble the mechanical components.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"Print Tuning Guide\" href=\"https:\/\/ellis3dp.com\/Print-Tuning-Guide\/\" target=\"_blank\"\u003e\u003cstrong\u003eTuning Guide\u003c\/strong\u003e\u003c\/a\u003e- We \u003ci\u003ehighly \u003c\/i\u003erecommend reading over this very detailed guide by Ellis to help print the best possible looking parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.ldomotors.com\/guides\/cable_chain_guide\" title=\"Cable Chain Guide\" target=\"_blank\"\u003e\u003cstrong\u003eCable Chain Guide\u003c\/strong\u003e\u003c\/a\u003e- See this guide for tips on our included cable chains (also known as drag chains).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.ldomotors.com\/en\/guides\/uk25_terminal_guide\" title=\"UK2.5B Terminal Guide\" target=\"_blank\"\u003e\u003cstrong\u003eUK2.5 Terminal Guide\u003c\/strong\u003e\u003c\/a\u003e- See this guide for tips on using the UK2.5 terminals included in our kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMore information\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJoin Voron on Discord: \u003ca href=\"https:\/\/discord.gg\/voron\"\u003ehttps:\/\/discord.gg\/voron\u003c\/a\u003e. The community is very active and the users are very helpful on the \u003cstrong\u003e#voron_2_questions\u003c\/strong\u003echannel.\u003c\/li\u003e\n\u003cli\u003eSince printed parts are NOT included with the kit, you can buy them separately with our \u003ca href=\"https:\/\/pif.voron.dev\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eVoron Print It Forward program\u003c\/a\u003e if you are unable to print them for yourself. They will provide the essential parts for a very reasonable cost to get your printer working.\u003c\/li\u003e\n\u003cli\u003eDownload Fusion 360 and get a free license to view the \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-2\/tree\/Voron2.4\/CAD\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3D model of the printer\u003c\/a\u003e. The 3D model is a very useful reference when you encounter anything in the manual that is ambiguous or unclear.\u003c\/li\u003e\n\u003cli\u003eCheck ou t\u003ca href=\"https:\/\/www.youtube.com\/channel\/UCmV40QWkVeRs_nAvEOE_P-g\" title=\"Nero3d YouTube Channel\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eNero 3D\u003c\/a\u003e and\u003ca href=\"https:\/\/www.youtube.com\/c\/SteveBuilds\" title=\"SteveBuilds YouTube channel\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e Steve Build\u003c\/a\u003e's YouTube channels, both are part of the Voron team and have tons of useful videos for building Voron 3D printers.\u003c\/li\u003e\n\u003cli\u003ePrint a\u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-2\/blob\/Voron2.4\/STLs\/Test_Prints\/Voron_Design_Cube_v7.stl\"\u003e Voron Cube\u003c\/a\u003e, then print a\u003ca href=\"https:\/\/github.com\/LDOMotors\/steppy\"\u003e Steppy\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.vorondesign.com\/about.html#serial-numbers\"\u003eGet a serial number \u003c\/a\u003eonce you finish building your Voron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"fabreeko discord\" href=\"https:\/\/discord.gg\/RgVVGT6cre\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eQuestions? Join our discord, where you can chat with other builders, ask questions and gather information to help you finish your kit faster.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"LDO","offers":[{"title":"350mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Black","offer_id":48574190223615,"sku":null,"price":1399.99,"currency_code":"USD","in_stock":false},{"title":"350mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Space gray","offer_id":48574190256383,"sku":null,"price":1399.99,"currency_code":"USD","in_stock":false},{"title":"350mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Blue","offer_id":48574190289151,"sku":null,"price":1399.99,"currency_code":"USD","in_stock":false},{"title":"300mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Black","offer_id":48574190321919,"sku":null,"price":1299.99,"currency_code":"USD","in_stock":true},{"title":"300mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Space gray","offer_id":48574190354687,"sku":null,"price":1299.99,"currency_code":"USD","in_stock":false},{"title":"300mm With E3D voron Revo HF Touch screen \u0026 Pi 4B (Rev D+) \/ Blue","offer_id":48574190387455,"sku":null,"price":1299.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/5001\/7990\/files\/V2.4_blue_kit_RevC_7.jpg?v=1715795852"},{"product_id":"ldo-voron-trident-kit-300mm","title":"Voron Trident (Rev D+) 3D Printer Kit by LDO","description":"\u003ch1\u003eVoron Trident (Rev D+) 3D Printer Kit by LDO\u003c\/h1\u003e\n\u003cp\u003eLDO's latest Voron Trident kit (Rev D+) adds new features and upgrades. Available in black, blue or gray.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003eNote: these kits are the US version 110V make sure your country supports this or that you can install a new bed heater for the appropriate voltage. \u003cbr\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003cem\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cem\u003ePreorders expected to arrive Late June to Early July\u003cbr\u003e\u003cbr\u003eRev D+ Changes for March 2026\u003c\/em\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eNitehawk SB update with USB passthrough for USB based eddy current probes\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cem\u003e \u003c\/em\u003e\u003c\/h2\u003e\n\u003ch2\u003e\u003cem\u003eRev D includes\u003c\/em\u003e\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eOctopus board replaced by \u003c\/strong\u003e\u003ca rel=\"noopener noreferrer\" title=\"leviathan LDO controller board for voron 2.4 and trident rev d\" href=\"https:\/\/www.fabreeko.com\/products\/leviathan-v1-2-controller-board-by-ldo-voron?_pos=1\u0026amp;_psq=leviathan\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cstrong\u003eLDO Leviathan board\u003c\/strong\u003e\u003c\/a\u003e - 5x TMC2209 drivers and 2x TMC5160 HV-compatible drivers for your A \u0026amp; B motors and is ready for 48V upgrades.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.fabreeko.com\/products\/nitehawk-sb-toolhead-by-ldo?_pos=1\u0026amp;_psq=nite\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"nitehawk Sb toolhead board for voron 2.4 and trident rev d Ldo kit\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eNitehawk SB Toolhead\u003c\/strong\u003e\u003c\/a\u003e - No more wire chains, LDO is moving their kits to USB toolhead boards for a cleaner and faster setup.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBondtech Integrated Drive Gear Assembly (IGDA) \u003c\/strong\u003e- one of the best extruder gears available on the market.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lighting\u003c\/strong\u003e - Upgraded to COB LED strip\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality of life upgrades\u003c\/strong\u003e - Pre-installed magnet sheet on the metal bed, printed parts (for LDO mods), and pre-terminated wiring all around.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2 data-pm-slice=\"1 1 []\"\u003e\n\u003cstrong\u003e🔥\u003c\/strong\u003eSpecial Deals\u003cstrong\u003e🔥\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eBundle the following items with your kit for a special discount. Just add them to your cart and the discount will be automatically applied.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e25% off Extrusion Backers:\u003c\/strong\u003e \u003ca href=\"https:\/\/www.fabreeko.com\/products\/v2-4-trident-titanium-extrusion-backers?variant=40722088001734\"\u003eTitanium \u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUpgrade the E3D Revo HF hotend\u003c\/strong\u003e to a \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/www.fabreeko.com\/products\/phaetus-rapido-high-flow-hotend\" title=\"Rapido, phaetus\" target=\"_blank\"\u003ePhaetus rapido HF\u003c\/a\u003e for just \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e$9.99\u003c\/strong\u003e\u003c\/span\u003e. Just add it to cart!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote: Rapido will require crimping of the hotend wires\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eOur system will only let you add one special deal per kit, if you want to take advantage of 2 or all 3 of them send us an email to Support@fabreeko.com or open a web chat and we will modify your order. \u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat you need to source\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/www.fabreeko.com\/collections\/printed-parts-by-pif\/products\/voron-trident-printed-parts-by-pif?variant=43645932470527\" title=\"pif printed parts voron trident\"\u003ePrinted parts\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"toc-header\" id=\"guides\"\u003e\u003c\/h2\u003e\n\u003ch2\u003eLDO Voron Trident Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNew for June 2024: (Rev D)\u003c\/strong\u003e now includes Raspberry Pi 4B, LDO Leviathan Board, LDO Nitehawk toolhead board, Bondtech IGDA, pre-installed bed magnet and included printed parts for LDO-specific mods (z endstop \u0026amp; other misc. parts).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE3D Revo High-Flow Hotend \u003c\/strong\u003ewith 60W heater.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry PI 4B\u003c\/strong\u003e with included heatsink.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClockwork 2\u003cem\u003e \u003c\/em\u003emotor\u003cem\u003e \u003c\/em\u003e\u003c\/strong\u003eincluded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLDO bed heater\u003c\/strong\u003e- Edge-to-edge heating pre-installed and wired ready to go!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless Steel Linear Rails\u003c\/strong\u003e - No more worrying about rusty rails. Remember to \u003ca class=\"is-internal-link is-valid-page\" href=\"https:\/\/docs.ldomotors.com\/voron\/Guide\/rail_grease_guide\"\u003eproperly lubricate\u003c\/a\u003e your linear rails!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"ldo nitehawk usb toolhead board for rev d voron 2.4 and trident\" href=\"https:\/\/www.fabreeko.com\/products\/nitehawk-sb-toolhead-by-ldo?_pos=1\u0026amp;_psq=nite\u0026amp;_ss=e\u0026amp;_v=1.0\" target=\"_blank\"\u003e\u003cb\u003eNiteHawk USB toolhead PCB\u003c\/b\u003e-\u003c\/a\u003e this toolhead simplifies wiring by moving to 1 usb cable (included) from the toolhead to the MCU. it also adds many other upgrades like build int accelerometer and multiple fan connections.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca class=\"is-external-link\" href=\"http:\/\/docs.ldomotors.com\/guides\/heatset_insert_tool_guide\"\u003e\u003cstrong\u003eBrass Heatset Insert Tool\u003c\/strong\u003e\u003c\/a\u003e - We've included a custom machined brass tip for your soldering iron, use it to install heatset inserts with ease!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca class=\"is-external-link\" href=\"http:\/\/docs.ldomotors.com\/adxl_tool\"\u003e\u003cstrong\u003eInput Shaper Tool\u003c\/strong\u003e\u003c\/a\u003e- We threw in a toolkit that includes all the necessary parts to help you perform input shaper calibration, hassle free.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-cut \u0026amp; Pre-wired\u003c\/strong\u003e - Our kit includes all necessary wiring: cut to the right length and pre-crimped or soldered to their respective parts. See instructions in LDO's \u003ca href=\"http:\/\/docs.ldomotors.com\/voron\/voron2\/wiring_guide_rev_a\" title=\"detailed wiring guide\"\u003edetailed wiring guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Screen Display\u003c\/strong\u003e - We've replaced the standard 12864 LCD with an IPS Capacitive Touch Display to use with \u003ca class=\"is-external-link\" href=\"https:\/\/klipperscreen.readthedocs.io\/en\/latest\/Installation\/\"\u003eKlipperScreen.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Lighting \u003c\/strong\u003e- Bring lighting to your Voron with included LED strips and all necessary wiring!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNevermore Filter\u003c\/strong\u003e - We include parts for an optional internal circulation filter: the \u003ca class=\"is-external-link\" href=\"https:\/\/github.com\/nevermore3d\/Nevermore_Micro\"\u003eNevermore Micro V5\u003c\/a\u003e by 0ndsk4 (carbon pellets not included due to shipping restrictions).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKlicky Mod\u003c\/strong\u003e - Instead of the included Omron inductive probe, We also provide the parts to build your machine using the optional \u003ca class=\"is-external-link\" href=\"https:\/\/github.com\/jlas1\/Klicky-Probe\"\u003eKlicky mod\u003c\/a\u003e by jlas1.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Tools\u003c\/strong\u003e - We include a small set of hex wrenches for all the fasteners used in the build (Preparing your own set of good quality hex wrenches is still recommended). Also included is a small flat head screwdriver that is useful in a surprising number of situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2mm Drill Bit\u003c\/strong\u003e - Metric drill bits may not be very common in some parts of the world, so we included one. Use it to ream the filament path in your printed extruder parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 class=\"toc-header\" id=\"guides\"\u003eGuides\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/docs.google.com\/document\/d\/10XAo2FOgWrmv7jFVE2-hvNAxiwAvwRz9e83Il6OWgBA\/edit?usp=sharing\" title=\"HoneyBadger bed heater install guide\"\u003eHoneyBadger bed heater install guide\u003c\/a\u003e \u003c\/strong\u003e- Step by step guide for a perfect\u003cstrong\u003e \u003c\/strong\u003eedge to edge heater install\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/docs.ldomotors.com\/voron\/voron-trident\/printed_part_guide_rev_a\" title=\"Printed Parts Guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003ePrinted Parts Guide (LDO supplement)\u003c\/strong\u003e\u003c\/a\u003e - Are you planning on printing parts before the kit arrives? Read our supplementary print guide to see which parts to print\/replace\/omit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/docs.ldomotors.com\/voron\/voron-trident\/wiring_guide_rev_a\" title=\"Wiring Guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eWiring Guide\u003c\/strong\u003e\u003c\/a\u003e - We created this supplementary wiring guide to go along with the included cable kit. We recommend reading the guide ahead of time: Some cable routing is required while you assemble the mechanical components.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" title=\"Print Tuning Guide\" href=\"https:\/\/ellis3dp.com\/Print-Tuning-Guide\/\" target=\"_blank\"\u003e\u003cstrong\u003eTuning Guide\u003c\/strong\u003e\u003c\/a\u003e - We \u003ci\u003ehighly\u003c\/i\u003e recommend reading over this very detailed guide by Ellis to help print the best possible looking parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.ldomotors.com\/guides\/cable_chain_guide\" title=\"Cable Chain Guide\" target=\"_blank\"\u003e\u003cstrong\u003eCable Chain Guide\u003c\/strong\u003e\u003c\/a\u003e - See this guide for tips on our included cable chains (also known as drag chains).\u003c\/li\u003e\n\u003cli\u003e\n\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/docs.ldomotors.com\/en\/guides\/uk25_terminal_guide\" title=\"UK2.5B Terminal Guide\" target=\"_blank\"\u003e\u003cstrong\u003eUK2.5 Terminal Guide\u003c\/strong\u003e\u003c\/a\u003e - See this guide for tips on using the UK2.5 terminals included in our kits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMore info\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eJoin Voron on Discord: \u003ca href=\"https:\/\/discord.gg\/voron\" class=\"is-external-link\"\u003ehttps:\/\/discord.gg\/voron\u003c\/a\u003e. The community is very active on Discord and the users are very helpful on the \u003cstrong\u003e#voron_1_trident_questions\u003c\/strong\u003e channel.\u003c\/li\u003e\n\u003cli\u003eSince printed parts are NOT included with the kit, it is recommended get them from through the \u003ca href=\"https:\/\/pif.voron.dev\/\" class=\"is-external-link\"\u003eVoron Print It Forward program\u003c\/a\u003e if you are unable to print them for yourself.  They will provide the essential parts for a very reasonable cost to get your printer working.\u003c\/li\u003e\n\u003cli\u003eDownload Fusion 360 and get a free license to view the \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-Trident\/tree\/main\/CAD\" class=\"is-external-link\"\u003e3D model of the printer\u003c\/a\u003e. The 3D model is a very useful reference when you encounter anything in the manual that is ambiguous or unclear.\u003c\/li\u003e\n\u003cli\u003eCheck out \u003ca href=\"https:\/\/www.youtube.com\/channel\/UCmV40QWkVeRs_nAvEOE_P-g\" class=\"is-external-link\"\u003eNero 3D\u003c\/a\u003e and \u003ca href=\"https:\/\/www.youtube.com\/c\/SteveBuilds\" class=\"is-external-link\"\u003eSteve Build\u003c\/a\u003e's Youtube channels, both are part of the Voron team and have tons of useful videos for building Vorons.\u003c\/li\u003e\n\u003cli\u003ePrint a \u003ca href=\"https:\/\/github.com\/VoronDesign\/Voron-2\/blob\/Voron2.4\/STLs\/TEST_PRINTS\/Voron_Design_Cube_v7.stl\" class=\"is-external-link\"\u003eVoron Cube\u003c\/a\u003e, then print a \u003ca href=\"https:\/\/github.com\/LDOMotors\/steppy\" class=\"is-external-link\"\u003eSteppy\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/docs.vorondesign.com\/about.html#serial-numbers\" class=\"is-external-link\"\u003eGet a serial number\u003c\/a\u003e once you finish building your Voron.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca title=\"fabreeko discord\" href=\"https:\/\/discord.gg\/RgVVGT6cre\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eQuestions? Join our discord, where you can chat with other builders, ask questions and gather information to help you finish your kit faster.\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Rev D 250 mm \/ Black \/ No","offer_id":48574182195455,"sku":null,"price":1199.99,"currency_code":"USD","in_stock":false},{"title":"Rev D 250 mm \/ Black \/ Yes","offer_id":43444444233983,"sku":"f0681","price":1443.32,"currency_code":"USD","in_stock":false},{"title":"Rev D 250 mm \/ Space gray \/ No","offer_id":48574182228223,"sku":null,"price":1199.99,"currency_code":"USD","in_stock":false},{"title":"Rev D 250 mm \/ Space gray \/ Yes","offer_id":44354261811455,"sku":"","price":1443.32,"currency_code":"USD","in_stock":false},{"title":"Rev D 250 mm \/ Blue \/ No","offer_id":48574182260991,"sku":null,"price":1199.99,"currency_code":"USD","in_stock":false},{"title":"Rev D 250 mm \/ Blue \/ Yes","offer_id":44254884167935,"sku":"f0686","price":1443.32,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Black \/ No","offer_id":48574182293759,"sku":null,"price":1274.99,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Black \/ Yes","offer_id":43444444365055,"sku":"f0682","price":1526.65,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Space gray \/ No","offer_id":48574182326527,"sku":null,"price":1274.99,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Space gray \/ Yes","offer_id":44548183752959,"sku":"","price":1526.65,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Blue \/ No","offer_id":48574182359295,"sku":null,"price":1274.99,"currency_code":"USD","in_stock":false},{"title":"Rev D+ 300 mm \/ Blue \/ Yes","offer_id":44548183785727,"sku":"","price":1526.65,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/5001\/7990\/files\/UAKE7LYg.jpg?v=1715794842"},{"product_id":"voron-v0-s1-kit-by-ldo-honeybadger","title":"Voron V0.2-S1 (R1) 3D Printer Kit by LDO \u0026 HoneyBadger","description":"\u003ch1\u003eVoron V0.2-S1 (R1) 3D Printer Kit\u003c\/h1\u003e\n\u003cp\u003eLDO's Voron V0.2-S1 (R1) 3D printer kit is perfect for both beginners and experienced users alike. The compact size and CoreXY motion system make it one of the fastest 3D printers on the market. No more waiting for long chamber heat-up times!\u003c\/p\u003e\n\u003cp\u003eWe carefully selected high quality parts so you can expect a seamless printing experience. Featuring a genuine HIWIN linear rail for the X gantry, you'll have better prints and professional results. Bring your 3D printing dreams to life and your \u003cstrong\u003eLDO Voron V0.2-S1 (R1) 3D printer kit\u003c\/strong\u003e today!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLDO Voron V0.2-S1 Kit Specs\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBased on the standard Voron \u003ca href=\"https:\/\/docs.ldomotors.com\/en\/voron\/voron01\/BOM\/Batch7\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eV0.2 LDO kit BOM\u003c\/a\u003e with the changes shown below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoron V0.2\u003c\/strong\u003e 100mm top hat, acrylic panels, and mini Stealth burner fans \u003c\/li\u003e\n\u003cli\u003eraspberry pi 4b\u003c\/li\u003e\n\u003cli\u003eGenuine HIWIN linear rail for X axis\u003c\/li\u003e\n\u003cli\u003eHoneyBadger stainless steel linear rails for Y \u0026amp; Z axis\u003c\/li\u003e\n\u003cli\u003eHoneyBadger finely-textured black PEI bed\u003c\/li\u003e\n\u003cli\u003eHoneyBadger dual sided \u003cstrong\u003eP-Series Smooth black\u003c\/strong\u003e PEI \u0026amp; \u003cstrong\u003ecarbon fiber\u003c\/strong\u003e on the other side (batch 5 and up)\u003c\/li\u003e\n\u003cli\u003eSlide-in M3 nuts\u003c\/li\u003e\n\u003cli\u003eKirigami Bed Mount\u003c\/li\u003e\n\u003cli\u003eEdge to Edge Polyimide Film Bed Heaters\u003c\/li\u003e\n\u003cli\u003e200W Power Supply\u003c\/li\u003e\n\u003cli\u003ePicobilical Board and toolhead PCB with umbilical cable\u003c\/li\u003e\n\u003cli\u003eE3D Revo™ hotend in (special Voron edition in LDO blue)\u003c\/li\u003e\n\u003cli\u003eSKR Pico board (LDO Edition)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat you need to source\u003c\/h2\u003e\n\u003cp\u003eComplete your Voron V0 kit with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrinted parts (\u003ca href=\"https:\/\/www.fabreeko.com\/collections\/v0\/products\/voron-v0-2-s1-printed-parts-by-pif?variant=43678271766783\"\u003ePIF parts available here\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eOptional \u003ca href=\"https:\/\/www.fabreeko.com\/products\/voron-v0-display-by-fysetc\"\u003eVoron V0 display\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eTime to build your awesome Voron V0 kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLinks\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrinted Parts Guide (LDO supplement)\u003c\/strong\u003e: Are you planning on printing parts before the kit arrives? Check out the\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"is-internal-link is-valid-page\" href=\"https:\/\/docs.ldomotors.com\/voron\/voron02\/printed_part_guide_rev_a\" title=\"LDO Voron V0.2 printed part guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003esupplementary print guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto see which parts to print\/replace\/omit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring Guide: \u003c\/strong\u003eFollow the\u003cspan\u003e \u003c\/span\u003e\u003ca class=\"is-internal-link is-valid-page\" href=\"https:\/\/docs.ldomotors.com\/voron\/voron02\/wiring_guide_rev_a\" title=\"LDO Voron V0.2 wiring guide\" rel=\"noopener noreferrer\" target=\"_blank\"\u003esupplementary wiring guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto make wiring your printer a breeze.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTuning Guide\u003c\/strong\u003e\u003cspan\u003e: \u003c\/span\u003eWe\u003cspan\u003e \u003c\/span\u003e\u003ci\u003ehighly\u003c\/i\u003e\u003cspan\u003e \u003c\/span\u003erecommend following \u003ca rel=\"noopener noreferrer\" title=\"Ellis' Print Tuning Guide\" class=\"is-external-link\" href=\"https:\/\/github.com\/AndrewEllis93\/Print-Tuning-Guide\" target=\"_blank\"\u003eEllis' Print Tuning Guide\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto help your printer reach its full potential.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThanks again to Voron Design for making (and keeping) the \u003ca href=\"https:\/\/vorondesign.com\/voron0.2\" title=\"Voron V0.2 project page\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eVoron V0.2 project\u003c\/a\u003e open source!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/discord.gg\/DasYQV7ksH\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cem\u003eQuestions? Join our discord server for Fabreeko kits or message us via the web chat\u003c\/em\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"LDO","offers":[{"title":"Black","offer_id":43991902879999,"sku":"103-S0692","price":639.99,"currency_code":"USD","in_stock":false},{"title":"Gray","offer_id":43607321280767,"sku":"103-S0693","price":639.99,"currency_code":"USD","in_stock":false},{"title":"Blue","offer_id":43991902945535,"sku":"103-S0694","price":639.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/5001\/7990\/products\/HoneyBadgerRailsforallothersurfaces_2.png?v=1715793560"},{"product_id":"fysetc-venture-xl-600x600-large-format-3d-printer-kit","title":"FYSETC Venture XL 600 cubed large 3D Printer Kit","description":"\u003ch1\u003eFYSETC Venture XL 600 cubed large 3D Printer Kit\u003c\/h1\u003e\n\u003cp\u003eThe Venture XL, an eye - catching oversized printer kit, is inspired by the classic VORON V2.4. The key components of this kit are high - precision CNC - machined parts, demonstrating outstanding quality. Meanwhile, it comes with the necessary printing components and tools considerately, and the print head and control box have been pre - assembled, enabling you to start the installation process effortlessly without the need to prepare additional parts. Once the installation is completed, you can immediately engage in the printing work and enjoy an efficient and convenient printing experience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreorder information: expected to ship in 30-45 days\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecs:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e550Mhz H723 single - \u003cstrong\u003eSpyder Pro V2 Mcu\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRK3568 with 4 cores at 2.0GHz, 2GB + 32GB\u003c\/strong\u003e for Running klipper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBIG TMC5160 at 48V \u003c\/strong\u003ehigh-performance stepper motor driver \u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e2.5A high temperature, high torque XY motors\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7-inch high definition capacitive touch screen.\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003e up to 500m\/s and an acceleration of 5000+\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency \u003cstrong\u003e4 zoned heated bed\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600 x 600 x 600\u003c\/strong\u003e printing area \u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCNC all metal Gantry \u0026amp; parts\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003e4040 aluminum extrusion frame\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eStealthMax air filter\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003eDual MW 350W PSU, 48V+24V\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eCNC carriage\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eEnclosed design with included panels\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e900x900x900 frame \u003c\/strong\u003earea can be \u003cstrong\u003emodified for idex or AWD\u003c\/strong\u003e (not available yet)\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eLogitech C270 Camera\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHigh-power\u003cstrong\u003e 63A\/40A contactor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB lighting system\u003c\/strong\u003e , Horizontal RGB lighting (84 LEDs) \u0026amp; SB LOGO RGB (10 LEDs) \u0026amp; Vertical RGB lighting (2x84 LEDs)\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003ePre-assembled independent control box\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"font-weight: bold;\"\u003e\u003cstrong\u003eNote: \u003c\/strong\u003erequires printing of skirts and other miscellaneous cosmetic parts to finish the build. \u003c\/p\u003e\n\u003ch3 style=\"font-weight: bold;\"\u003e\u003ca href=\"https:\/\/github.com\/FYSETC\/Venture_XL\" title=\"fysetc venture xl Voron phoenix\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eMore info and Full parts list can be found in the Fysetc Github \u003c\/a\u003e\u003c\/h3\u003e","brand":"Fysetc","offers":[{"title":"Default Title","offer_id":46710026928383,"sku":"D-FYS-VXL","price":2199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0266\/5001\/7990\/files\/03_14621359-6f42-4c9e-bbb3-2cd7ebaecf38.webp?v=1742392514"}],"url":"https:\/\/www.fabreeko.com\/collections\/voron-printers.oembed","provider":"Fabreeko","version":"1.0","type":"link"}