TMC5160T Plus V1.0 Driver with Heatsink

TMC5160T Plus is a high-power stepper motor driver control module, featuring 8 high-power MOSFETs separately mounted on the board with a maximum voltage of 60V. This supports a wider range of stepper motors and offers greater adaptability.

About this item

• 8 high-power MOSFETs separately mounted on the motherboard with 100V voltage resistance, 93A current resistance, and equivalent resistance as low as 6mΩ, significantly enhancing the drive's performance.
• Supports a maximum voltage of 60V, a maximum effective current (IRMS) of 10.6A, and a sine wave peak current of up to 15A; Stealth Chop mode and Spread Cycle mode selectable, with standalone mode, UART mode, and SPI mode selectable.
• Integrated heat sink design, providing high heat dissipation while enhancing structural integrity and aesthetics; Heat sink pre-designed with fan mounting holes for DIY fan installation.
• On-board 24V always-on fan interface facilitates active cooling; ESD protection on the drive power, logic power, etc., to prevent damage due to power fluctuations and static electricity.
• Supplied with adapters and wires for both standard drives and EZ drive, for user convenience; Encoder interface reserved for DIY usage;

TMC5160 specs:

• Input Voltage (HVIN): 8V-60V
• Maximum Effective Current: 10.6A, Sine Wave Peak Current 15A
• Capacitor: 2 x 560uF
• Maximum Subdivision: 256
• Operating Mode: SPI, SD
• Sampling Resistor: 22mΩ

More info can be found here: 5160T Plus